christmas Bookmark

Descriptionplease follow this: slice first:point 1: reduce only x and y axes and not the z axe.point 2: slice the bookmark first : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150*43 mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.3 PLA Kingroon Green Transmission Distance: 3.1 PLA Kingroon Red Transmission Distance: 4.2 PLA Kingroon White Transmission Distance: 5.8This print uses 4 unique filaments Swap Instructions:Start with Black At layer #8 (0.72mm) swap to Green At layer #13 (1.12mm) swap to Red At layer #22 (1.84mm) swap to White for the rest. huefforgebookmark