Christmas present simple lines

by Mano's 3d_Art · Hueforge & Lithophane

1 Downloads

1 Likes

1 Makes

ONLY 3 COLORS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Protopasta Good as Gold Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.9This print uses 3 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Good as Gold At layer #17 (1.44mm) swap to Yellow At layer #25 (2.08mm) swap to Good as Gold for the rest.