Thingiverse
christmas star
by Jmader123
25
Downloads
28
Likes
0
Makes
created this star like the appearance of herrnhut stars. Glue the top and bottom Part of the framework together with the pins inserted. You also have to glue the spikes and brackets OR print the combinded version with normal mode till ... mm and than in vase-mode (create this model later)
The adantage is, that the dissassembly is possible exept of the frame.
I dont know if you can screw every lampadapter, but I designed it for the "creative cable EIVA" for hopefully waterproof assembly.
You need 28 Screws of 10-20mm.
print...
- Frame
- 17x square spikes (best in vase-mode) and brackets OR combined square spike
- 8x triangular spikes (best in vase-mode) and brackets OR combined triangular spike
- 24x clamping adapter
- lamp socket adapter
- Pins are for a bore of 2,5mm, so you should choose the right pin for that.
The adantage is, that the dissassembly is possible exept of the frame.
I dont know if you can screw every lampadapter, but I designed it for the "creative cable EIVA" for hopefully waterproof assembly.
You need 28 Screws of 10-20mm.
print...
- Frame
- 17x square spikes (best in vase-mode) and brackets OR combined square spike
- 8x triangular spikes (best in vase-mode) and brackets OR combined triangular spike
- 24x clamping adapter
- lamp socket adapter
- Pins are for a bore of 2,5mm, so you should choose the right pin for that.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
