ChromaLink - Space Dash

Whether you're looking to print off one panel, or cover a whole wall, ChromaLink can expand to your needs!Make sure you have printed the starter kit that can be found here, as well as have some 5x2 round magnets. The included .3mf file is fully configured as-is, and if using the same filaments, will not need to be adjusted at all. If you need to use your own filaments, the ChromaLink file, all component models, and the source image are all in the included .zip file. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mmThe Model is 216.51x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA GizmoDorks Dark Purple Transmission Distance: 3.5 PLA Elegoo Purple Transmission Distance: 5.3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA PolyLite Lime Green Transmission Distance: 3.5 PLA BambuLab Basic Jade