Thingiverse
Electronics
Go to Model
Chromecast Remote Controller Battery Cover
41
Downloads
52
Likes
0
Makes
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one.
Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin print.
I did this with a .4nozzle and Cura using super settings and a raft with tree supports. Took about 3 hours and 11grams of filament.
If you have the stock back panel, I suggest using it still. Google designed it better than I did. This is purely for people who have lost it completely and have no other option.
If you're looking to color code your remotes for specific rooms, I suggest printing a skin for the remote, or just putting some scotch tape on the back with the room written on it. The simplest answer is often the best.
Enjoy!
Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin print.
I did this with a .4nozzle and Cura using super settings and a raft with tree supports. Took about 3 hours and 11grams of filament.
If you have the stock back panel, I suggest using it still. Google designed it better than I did. This is purely for people who have lost it completely and have no other option.
If you're looking to color code your remotes for specific rooms, I suggest printing a skin for the remote, or just putting some scotch tape on the back with the room written on it. The simplest answer is often the best.
Enjoy!
LiveFromNewYawk also publishes on
41 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
