Chrsitmas Holiday Sled

Colorful Christmas holiday sleds with a variety of combinations, great as tree ornaments or decorations. Objects are split into parts so you have lots of control over color schemes/combinations. I was able to print 2 dozen with no problems on an X1C with the provided profile. The snowflakes are pretty fine and if you have issues that you just can't adjust for, you can delete them from the object and print without them. There are no supports required for the decks or skis but the handlebars use a brim and tree supports (all in the print profile). To assemble, just use a tiny drop of CA adhesive on the 8 pins located on the deck bottom then align the holes in the ski supports onto the pins and press on. Start with one ski (either side); once glued and pressed on, insert the handlebars into the glued ski then repeat the process for the other ski, aligning with the handlebar before pressing onto the deck. Adhesive can be used for the handlebars to solidify the assembly a bit better but