Thingiverse
chubby mini spinner - M8 hidden nuts
von nicuz
91
Downloads
44
Likes
3
Makes
This is a mini-spinner (65mm width) that embeds two M8 nuts and a standard 608 bearing.
The nuts add the necessary weight in order for the spinner to spin longer. The body is designed so that the nuts and the bearing are perfectly hidden.
The body is made by two parts (plus caps) perfectly matchable.
instructions (see images too):
1) print all the spinner parts (stl files). It took me about 40 mins to print all the parts together.
2) push the bearing and the M8 nuts in their housings in part01 (largest part)
3) take part02 and push it on part01 until the two parts are perfectly joined. Help yourself with a rubber hammer, if necessary
4) plug the caps
5) spin!
Happy printing!
please, take a look at my other things here: https://www.thingiverse.com/nicuz/designs
The nuts add the necessary weight in order for the spinner to spin longer. The body is designed so that the nuts and the bearing are perfectly hidden.
The body is made by two parts (plus caps) perfectly matchable.
instructions (see images too):
1) print all the spinner parts (stl files). It took me about 40 mins to print all the parts together.
2) push the bearing and the M8 nuts in their housings in part01 (largest part)
3) take part02 and push it on part01 until the two parts are perfectly joined. Help yourself with a rubber hammer, if necessary
4) plug the caps
5) spin!
Happy printing!
please, take a look at my other things here: https://www.thingiverse.com/nicuz/designs
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
