Chunky3D Blanket Loom

3D printed loom to make a yarn blanket. Flat base is 10mm thick for a sturdy base. Optionally you can attach to a 1X4 or 2X4 to give it even more rigidity. I've used the default 10mm base without a wood backing without any issues. Posts are 1-inch thick with 2-inch on center - distance between the posts is equal to the post diameter. Intentionally, the pieces fit snugly to prevent separating during knitting. Plate 1 has 2 sections so to get a 60-inch wide blanket, you need 8 total sections - print plate 1 four times. Want a bigger blanket, print more sections to add length. Each section is 8-inch.Plate 2 is the endcaps and you only need to print once to have each end. Plate 1 10mm base - 218g x 4 = 872g total (8 sections, 64 inch)Plate 2 10mm base - 21g x 1 = 21g totalTotal Filament = 893g I have included a print profile for a 1-inch version with a 5mm flat base if you intend to mount on wood or metal and want to save some filament.5mm base is ~20% less filamentI have included a pr