CinePi Frame8 - Raspberry Pi Box Camera V1

🎥 CinePi Frame8 – An Open-Source Cinema Camera You Can Make at HomeThe CinePi Frame8 is a compact, 3D-printable DIY cinema camera powered by the open-source CinePi V2 firmware. Built around the Raspberry Pi 4 Model B and HQ Camera Module, it brings true RAW video capture into a maker-friendly package that's easy to print and assemble. Designed with beginners in mind, the entire build takes about an hour after printing. ⚠️ NOTE: Always power off the device using the touchscreen interface, not the physical power button. Once the system is shut down, then remove USB-C power. Improper shutdown via the physical button may damage the camera.🔧 Key Features:Powered by CinePi V2 Firmware (Open Source)Sony IMX477 12.3 megapixel super8 sensorRecords in CinemaDNG RAW formatExternal recording via USB 3.0 SSD (Samsung T7 recommended)Touchscreen controls for ISO, shutter speed, frame rate, white balance, etc…Designed for reliable, continuous recording with active cooling and proper power manage