Cintiq 13HD Vesa mounting bracket

Vesa mounting bracket for Cintiq 13HD (tested with DTK-1301)
Re-uses the slots in the back of the display to attach a 75mmx75mm vesa-compatible mounting plate.
No modifications required.

Hardware required
- At least 4 m4-20mm screws
- 8-10 m4 nuts (locknuts are optional)

What to print:
- 2x clip.stl
- 1x mountplate.stl

How to install
- Install the m4 nuts in the bottom of the mounting plate (some force may be required as they are slightly undersized: use a screw to hold the nut and wiggle until it moves into place)
- Add one of the clips to the mounting plate (use a flathead screwdriver to stop the nut from moving while tightening the screws)
- Attach the partially assembled mount to the back of the display and install the final clip