Clair Obscur - Alicia

Hello, this is a Hueforge print I made for a vinyl cover.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.28mm

The Model is 310x310mm in size

You may print at higher layer heights below the Base Thickness of 0.84mm
The Max allowed Thickness is 2.6mm and the Actual Thickness is 2.6mm

Filaments Used: (* = Owned)
000000 * PLA Inland Black Transmission Distance: 1
5f6575 * PLA Sunlu Grey Transmission Distance: 1.4
dee4e3 * PLA Creality Hyper White Transmission Distance: 7.0
f5cad1 * PLA eSun Sakura Pink Transmission Distance: 8.5
91202b * PLA Sunlu Fire Engine Red Transmission Distance: 5.5
This print uses 5 unique filaments

Filament Swap Instructions:
Start with Black
At layer #12 (1.16mm) swap to Grey
At layer #15 (1.4mm) swap to White
At layer #21 (1.88mm) swap to Pink
At layer #23 (2.04mm) swap to Fire Engine Red
At layer #28 (2.44mm) swap to White for the rest.