Slicer Discord
Clamp on Filament Rack Bracket – 3D-printbaar model van MakerWorld MakerWorld
3D Printer Accessories

Clamp on Filament Rack Bracket

2 Downloads
3 Likes
1 Makes
Model downloaden
I designed this bracket to be able to clamp to a surface in place of being permanently attached to it. In my case, a steel I beam, but I made the clamp compatible with a thickness up to 25mm (1"). You could clamp it to an already existing shelf if needed. The screw does need to be glued together; I left a 4mm hole in the center if you wanted to fill it with epoxy or add a metal rod for strength. The screw is a M14x2 and I would recommend running a tap through the threads in the bracket body for a smoother experience. You will require 25mm (1") dowels to make this into a proper rack. I have 4 brackets over a 2 meter (6.5') span and they are holding just fine. Printed in BBL PETG HF.
Categorie
3D Printer Accessories
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
uitgebreide nabewerking
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, PETG
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie