ClariSea 3000 Gen2 Extension

It works! I get it running! It is not perfect but it does what its supposed to.

I had to reprint the planetary gear with finer print settings:

layer 0.15mm!
wall thickness: 1.2mm
inlay 50%
print sun gears with 100% infill
speed on my anker make5 - 250mm/s (do not use fast mode)

Part list:
Step Motor SIMAX3D Nema 17 Schrittmotor 42x23mm 0,7A-4.23V 2 Phase
https://www.amazon.de/-/en/dp/B08FFKZLYH/ref=twister_B08RXKXBBG?_encoding=UTF8&psc=1

Step Driver A4988 Stepper Motor Driver
https://www.amazon.de/-/en/dp/B01N9QOJ99/ref=twister_B07ZQHN62Q?_encoding=UTF8&psc=1

Stepper Motor Drive Extension Board
https://www.amazon.de/dp/B07NSVN9BR?psc=1&ref=ppx_yo2ov_dt_b_product_details

2 pcs. screw M3 30mm and some M3 spacers (see image)

Assemble and plug it into the lid of your clariSea 3000.

1. Assembling the planetary gear, make sure the sun gear fits on the motor shaft.
2. Screw the rear cover to the motor. The gap between the motor and the lid is as thick as the