Classic Car 1

Project: Classic Car 1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 220.01x150.69mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used: PETG Creality Black Transmission Distance: PLA+ Sunlu Grey Transmission Distance: PETG Creality White Transmission Distance:This print uses 3 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #18 (1.52mm) swap to White for the rest.