Thingiverse
Classic Carved Vase
por JobSmolders
72
Descargas
52
Likes
0
Makes
Classic Carved Vase
I printed this Vase in “Spiral Outer Contour Mode” ,0.2mm resolution, 0.4mm nozzle and 105% Flow Rate. Yes 5% more than normal. This was needed for my printer to fill all the gaps. Another important finding with this model: If I scale the size in Cura below 75% (min Z hight 236,5mm) in spiral outer contour mode, Cura will not make a good “slice”and the print will fail.
UPDATE MAY-16-2018
I made a correction of 0,5mm outwards of the carved section. Some users had problems slicing this model. The inside walls did sometimes hit each other, making the print fail.
I printed this Vase in “Spiral Outer Contour Mode” ,0.2mm resolution, 0.4mm nozzle and 105% Flow Rate. Yes 5% more than normal. This was needed for my printer to fill all the gaps. Another important finding with this model: If I scale the size in Cura below 75% (min Z hight 236,5mm) in spiral outer contour mode, Cura will not make a good “slice”and the print will fail.
UPDATE MAY-16-2018
I made a correction of 0,5mm outwards of the carved section. Some users had problems slicing this model. The inside walls did sometimes hit each other, making the print fail.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
