MakerOnline

Tools / Hand Tools

Claws

by Bhavin Vyas · Tools / Hand Tools

172 Downloads

32 Likes

0 Makes

Go to Model

NO SUPPORT IS REQUIRED TO MAKE IT ONLY UNDER 35 G PRINTED IN LESS THAN 1.5 Hour....

Category

Tools / Hand Tools

Source

MakerOnline

Published

11.01.2026

Updated

11.01.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Claws need supports when printing?

No supports needed for Claws — it's designed to print clean off the bed.

How long does it take to print Claws?

According to the design notes, Claws takes approximately 1.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Claws available in?

Claws is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Claws free to download?

Yes, Claws is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Claws

Similar Models

Add to Collection