Clerks - hueforge

Hueforge of ClerksThe photos shows the result in 134.8x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 134.8x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.32mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7This p