Thingiverse
Climbing crimp with sling ring
par stijnponsioen
2
Téléchargements
2
Likes
0
Makes
20 mm crimp climbing hold with integrated sling ring, designed in Fusion 360. Rounded edges for better comfort, sized to fit a large male hand, primarily intended for finger warm-up, can be used for strength training. The print can also be used to with second pads as a jug or with an elastic band for dynamic loading.
Minimal cross section per side = 146 [mm^2]
Ultimate Tensile Strength PLA = ~60 [MPa]
safety factor = 5
g = 9,81 [m*s^-2]
F = P * A * (1/safety factor)
Fmax_per_side = 60*146*0.2 = 1752 [N]
max static load = two sides * Fmax_per_side / gravitational constant (g)
= 2*1752/9.81 = ~357 [kg]
Minimal cross section per side = 146 [mm^2]
Ultimate Tensile Strength PLA = ~60 [MPa]
safety factor = 5
g = 9,81 [m*s^-2]
F = P * A * (1/safety factor)
Fmax_per_side = 60*146*0.2 = 1752 [N]
max static load = two sides * Fmax_per_side / gravitational constant (g)
= 2*1752/9.81 = ~357 [kg]
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
