Thingiverse
Clock 3 Enclosure Door Latch
por jonspaceharper
0
Descargas
0
Likes
0
Makes
This is a simple latch for an enclosure door.
The two (2) M5 screws holes are offset so that they will fit into 2020 t-slot extrusions. In the sample pictures, the wood strips are in front of t-slot extrusions, so you can picture how they fit together.
No supports are required. Print with at least 2mm walls (5 perimeters with an 0.4mm nozzle).
The two (2) M5 screws holes are offset so that they will fit into 2020 t-slot extrusions. In the sample pictures, the wood strips are in front of t-slot extrusions, so you can picture how they fit together.
No supports are required. Print with at least 2mm walls (5 perimeters with an 0.4mm nozzle).
jonspaceharper también publica en
30 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
