Thingiverse

Clock (Dual Ulysse Escapement)

von A26

2.4k Downloads

2k Likes

4 Makes

Zum Modell

I decided to convert TheGoofy's excellent clock (https://www.thingiverse.com/thing:328569) to one using a dual ulysse escapement. Designed by Ludwig Oeschlin, it is a modern take on Breguet's natural escapement. The promised gain in efficiency by virtue of its use of radial thrust is somewhat offset by the need to overcome the rotational inertia of two escape wheels rather than one. Ulysse Nardin minimized this problem trhough the use of silicone parts. I just made the wheels extra thin.

Though I consider this a remix of TheGoofy's design, I ended up making all of the parts from scratch (though I suppose the pulley and weight carrier carry over). The frame ended up a bit larger but flatter. I also decided to toss in a differential winding drum. The clock seems to run quite well on 1.9kg of weight (though individual results will vary) for about six hours (with pulley)

Non-printed materials include:
2mm x 16mm dowel pins
2mm x 34mm shafts
3mm x 34mm shaft
550 cord guts

balance wheel Bevel Gear clock clockwork escapement Gear gears mechanical Mechanical Clock time wall clock balance wheel Bevel Gear clock clockwork escapement Gear gears mechanical Mechanical Clock time wall clock balance wheel Bevel Gear clock clockwork escapement Gear gears mechanical Mechanical Clock time wall clock

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Clock (Dual Ulysse Escapement)

Ähnliche Modelle

Zur Sammlung hinzufügen