Thingiverse

Clock Face "VeneeredPMMA" cnc

di ZenziWerken

189 Download

127 Likes

0 Makes

After creating the wall clock ["Gorgeous Gorges"](https://www.thingiverse.com/thing:3233780) I was thinking about making another multilayered design that would make use of the depth of cut. Then it came to my mind that a while back a donor gave me a few sheets of 15 mm acrylic glass and I had the idea of applying thin veneer to the surface and then cutting the numbers with a very fine end mill. It showed that a little lighting would be necessary if the clock is not placed on the windowsill, so I added led-strips.

Gluing wood to acrylic glass worked quite well using a 30 minute epoxy. Then I engraved the numbers with a 1.2 mm spiral toothed endmill. I cut only through the veneer, leaving the acrylic glass nearly untouched. You can imagine I was happy that the counters did not come loose. I engraved the circle of the outer perimeter to ensure that the veneer wouldn't get hurt by the next step.

The acrylic glass has to be cut using distinktive parameters: you need to go fast while c

acrylic glass clock desk clock LED led strip lighting Oak plexiglass pmma Sorotec BasicLine veneer wall clock Wood Veneer ZenziWerken acrylic glass clock desk clock LED led strip lighting Oak plexiglass pmma Sorotec BasicLine veneer wall clock Wood Veneer ZenziWerken

Fonte

Thingiverse

Cosa serve per stampare: Principiante Bassa affidabilità

Perché?

senza supporti

Senza supporti Pezzo unico

Supporti 0/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante