Thingiverse
Clock Vitesse Arnhem
von Kaphaak
3
Downloads
8
Likes
0
Makes
My son is a fan from the Dutch Premier Division soccerclub Vitesse. And since he got new living quarters i decided to make him something fort he house. I ordered some cheap (70 eurocent) clock modules in China.
https://www.aliexpress.com/item/Free-shipping-Quartz-Clock-Movement-Mechanism-DIY-Repair-Parts-Black-Hands/32826015747.html?spm=a2g0s.9042311.0.0.27424c4dTYQpSE
And designed the clock face in the clubs colors yellow, black and white.
The bottom 1,5mm are yellow then from 1,5mm to 2,5mm are black and above that its white. So you will have to tell your g-code that you want to change colors there. This is either possible by entering g-code but i do not have experience with that so i used Prusacontrol. (since i have a Prusa the software allready is on my computer)
Because of the size of the clock face, which has a diameter of 200mm i had to print the first layer with a speed of 55% in order to get a nice first layer. It was not perfect but enough because the following laye
https://www.aliexpress.com/item/Free-shipping-Quartz-Clock-Movement-Mechanism-DIY-Repair-Parts-Black-Hands/32826015747.html?spm=a2g0s.9042311.0.0.27424c4dTYQpSE
And designed the clock face in the clubs colors yellow, black and white.
The bottom 1,5mm are yellow then from 1,5mm to 2,5mm are black and above that its white. So you will have to tell your g-code that you want to change colors there. This is either possible by entering g-code but i do not have experience with that so i used Prusacontrol. (since i have a Prusa the software allready is on my computer)
Because of the size of the clock face, which has a diameter of 200mm i had to print the first layer with a speed of 55% in order to get a nice first layer. It was not perfect but enough because the following laye
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
