Closure

Project: Slug.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.09x152.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA PolyLite Wine Red Transmission Distance: 1 PLA Overture/Polylite Black Transmission Distance: 0.7 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Wine Red At layer #7 (0.64mm) swap to Black At layer #12 (1.04mm) swap to Jade White for the rest.