Thingiverse
Clothesline kit
by tcroonen
5
Downloads
4
Likes
0
Makes
This is a kit to build a dryer rack for clothes.
https://makeprojects.com/project/platzsparendes-wsche-trocken-gestell
It contains:
Feet 30° for the bottom/floos side.
Feet 60° for the upper/wall side.
T-connectors for the stability tubes.
Sleeves to protect the rope.
Wallmount elements.
Additionally needed:
Tube 20mm diameter.
Tube 15mm diameter.
Rope < 4mm diameter (Nylon).
Some srews.
Wooden bars.
The size of the rack is variable and depends on the length of the tubes.
The stabilizer can be implemented once or more than once. Depends on the whole size and needed stability.
In my project i choose 8cm distance between the ropes. This came out as a usable distance.
Cut the tubes to the length you whish, Drill the holes for the rope sleeves 6.5mm diameter in 8cm distance.
Prepare the wooden bars to fit on each end of the rack. Mount it.
Place the wallmount where you want to place the rack and put the rack into the wallmount.
Finish.
;-)
https://makeprojects.com/project/platzsparendes-wsche-trocken-gestell
It contains:
Feet 30° for the bottom/floos side.
Feet 60° for the upper/wall side.
T-connectors for the stability tubes.
Sleeves to protect the rope.
Wallmount elements.
Additionally needed:
Tube 20mm diameter.
Tube 15mm diameter.
Rope < 4mm diameter (Nylon).
Some srews.
Wooden bars.
The size of the rack is variable and depends on the length of the tubes.
The stabilizer can be implemented once or more than once. Depends on the whole size and needed stability.
In my project i choose 8cm distance between the ropes. This came out as a usable distance.
Cut the tubes to the length you whish, Drill the holes for the rope sleeves 6.5mm diameter in 8cm distance.
Prepare the wooden bars to fit on each end of the rack. Mount it.
Place the wallmount where you want to place the rack and put the rack into the wallmount.
Finish.
;-)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
