Thingiverse
Cloud and Moon Speaker Button Screen Enclosure
par SANGER_A2
0
Téléchargements
6
Likes
0
Makes
This is very easy to print with no supports, but it will need the cloud gluing onto the moon (that way you can have two different colour filaments). It's designed to hold this lovely little SPI screen from Waveshare, two buttons that have a 12mm cutout and a 30mm speaker.
https://www.amazon.co.uk/dp/B081Q79X2F
Full details including code on github here https://github.com/SANGERA2/moon-sleep-helper/
This was designed to use an air quality sensor inside the moon, which is why the back is so open and it's separated from the main compartment via a small hole.
The backs have a pretty tight tolerance so they fit on with friction, but you could always add a little glue once you know everything is working.
There is no hole for a power port, my idea was you'd just run the USB cable through one of the slots.
This is designed to be used with a full-size Raspberry Pi so there's a lot of room in there, but it would be easy to shrink down to be slimmer if you're using an Arduino or s
https://www.amazon.co.uk/dp/B081Q79X2F
Full details including code on github here https://github.com/SANGERA2/moon-sleep-helper/
This was designed to use an air quality sensor inside the moon, which is why the back is so open and it's separated from the main compartment via a small hole.
The backs have a pretty tight tolerance so they fit on with friction, but you could always add a little glue once you know everything is working.
There is no hole for a power port, my idea was you'd just run the USB cable through one of the slots.
This is designed to be used with a full-size Raspberry Pi so there's a lot of room in there, but it would be easy to shrink down to be slimmer if you're using an Arduino or s
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !