CM Devil #13

***Notice, This print requires a .2mm nozzle and 0.02mm layer heights, it will take 89 hours to print***Print at 100% infill with a layer height of 0.02mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Royal Blue Transmission Distance: 3.2 PLA+ Numakers Pure White Transmission Distance: