Thingiverse
CNC Simple Probe V1
par Jocman
7
Téléchargements
2
Likes
0
Makes
As I need to install a probe on my CNC (well, the workplan is not perfectly flat, so I've to cheat it), I designed this small probe.
Just need it a microswitch and a small rivet, 2 M3 screws, some wires and a nail.
As the rivet is to long, I used an old ballpen plastic refill to limit its depth.
Originally, the probe was created to be inserted into the mill's chuck, later I decided to expoxyglue it to a slide to mount it on the shoulder installed on my Z axis
See my other Things about CNC)
Well, till now all my test have been positive, the probe works fine.
Just need it a microswitch and a small rivet, 2 M3 screws, some wires and a nail.
As the rivet is to long, I used an old ballpen plastic refill to limit its depth.
Originally, the probe was created to be inserted into the mill's chuck, later I decided to expoxyglue it to a slide to mount it on the shoulder installed on my Z axis
See my other Things about CNC)
Well, till now all my test have been positive, the probe works fine.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
