Thingiverse
CNC4N corner brace
von Masterlefty
6
Downloads
3
Likes
0
Makes
Corner brackets to locate CNC Router to frame base. These were created to position and locate and CNC4Newbie New Carve CNC Router, but should work with any machine that has at least 10mm of clearance between the base and Y-Axis mounting plates.
Model will print a left and right brace, so you will need to print 2X to fix all four corner.
I printed at 0.2mm extrusion height (>50% fill), but should work at 0.25 or 0.3.
Model will print a left and right brace, so you will need to print 2X to fix all four corner.
I printed at 0.2mm extrusion height (>50% fill), but should work at 0.25 or 0.3.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
