Thingiverse

CO2 Rocket Fully Assembled

by Diterex

166 Downloads

133 Likes

0 Makes

This is a work in progress. The few launches that I tried, all failed. The rocket comes out of the tube and tumbles end over end. Please let me know of tolerance issues. I will update as I can. I'm still pretty new to Fusion360.

!!!BE SAFE - CO2 CONTAINER IS UNDER HIGH PRESSURE CAN BE VERY DANGEROUS!!!
!!!ATTEMPT TO BUILD AT YOUR OWN RISK!!!
!!!THERE IS AN EXPLOSION AND SHRAPNEL RISK!!!
!!!THIS IS NOT A TOY!!!
!!!NOT ADVISABLE FOR CHILDREN!!!
!!!DO NOT USE IN CROWDED AREA!!!
This is a Remix of https://www.thingiverse.com/thing:1663930.

You will need...
1.25in PVC pipe
1.25in PVC pipe cap
PVC Glue
0.75in Wood Screw

Assembly...
Glue cap to the end of the pipe. Find the center of the cap. Screw the wood screw up through the cap.
Insert 12oz CO2 cartridge in the open end of the plastic rocket with the skinny part of the cartridge towards the bottom.

How to use...
Place pipe with the cap and screw side down on the ground in an open field

12g co2 caution CO2 danger dangerous dangerous prototypes fully assembled fully printable missle model rocket mortar no assembly required projectile prototype pvc pvc pipe rocket rocketry Rockets

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design · significant post-processing

Print-in-place Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer