Coffee capsule refill toolkits

这是一套用来填充咖啡胶囊的工具，我用来填充我的不锈钢胶囊壳表现出色。我制作了两个版本的底座，最初的版本（plate 2）需要4颗M2.6自攻螺丝（10-20mm均可，我使用M2.6*12mm，非常完美），用于连接支撑与面板，这样打印跟快速、牢固。为方便找不到螺丝的朋友，第二个版本（plate 1）采用了燕尾榫结构，不需要螺丝来连接固定。我试过无支撑打印，除了燕尾槽口的地方有些微下垂需要稍微修剪外，其余部分表现完美。打印前请先确认胶囊尺寸是否合适，或通过等比例缩放，调节到合适大小。------------------------------------This is a set of tools designed for filling coffee capsules. It performs excellently when I use it to fill my stainless steel capsule shells.I've created two versions of the base. The initial version (plate 2) requires 4 M2.6 self-tapping screws (10-20mm lengths work fine; I used M2.6*12mm, which is perfect) to connect the support to the panel, allowing for quicker and more sturdy printing.For those who can't easily find screws, the second version (plate 1) uses a dovetail joint structure, eliminating the need for screws to connect and secure it. I've tested printing it without supports, and aside from a slight droop at the dovetail notch that requires minor trimming, the rest comes out perfectly.Befo