Coffee Cup Coaster - Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 100x111.09mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 Bambulab Basic Orange Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #12 (0.6mm) swap to Orange At layer #28 (1.24mm) swap to White for the rest.