Coffee ground Puller for OutIn baskets

One of the tricky things when making ground coffee with the OutIn is that the used coffee is hard to remove. I went through several prototypes. I made a spoon with a precise angle, created a special spiral that didn’t work at all—and here you can print my latest attempt, which actually helps remove the coffee from the basket. Printing The print is simple, as long as you don’t have issues with overhangs. I recommend using a brim around the object and the “Inner/outer” mode. Material If you print the object with PLA, it will definitely bend during use. Coffee is quite hot and exceeds PLA’s heat resistance, so I recommend printing with a more heat-resistant material or as you wish. Note The puller isn’t exactly edge-to-edge, but slightly narrower, because otherwise it would scrape against the metal grooves inside the basket.