Thingiverse
Coheed and Cambria Keywork Fidget Spinner
von Gul_Delox
17
Downloads
14
Likes
0
Makes
Designed in Fusion 360 for a friend who is a massive Coheed and Cambria fan.
Requires 4x 608 ZZ skateboard bearings.
Print 2 of the Center parts. They should snap together pretty tightly inside the central bearing. Put some glue on the tip of the first center peg before putting the second one in so that they don't rotate free of each other.
The tolerances are pretty tight, so I recommend printing in PETG and using a vice clamp to force the bearings into the spinner body. It shouldn't require any glue to keep them in place.
Requires 4x 608 ZZ skateboard bearings.
Print 2 of the Center parts. They should snap together pretty tightly inside the central bearing. Put some glue on the tip of the first center peg before putting the second one in so that they don't rotate free of each other.
The tolerances are pretty tight, so I recommend printing in PETG and using a vice clamp to force the bearings into the spinner body. It shouldn't require any glue to keep them in place.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
