COMBINATION PADLOCK 2

This is a remake of the wonderful Combination Padlock design.
by BCaron (https://www.thingiverse.com/thing:5653699)

In the original design, the Padlock_Cap needed to be glued in to prevent the Padlock_Shackle from falling out. I did not have glue, so instead of Padlock_Cap I made a Screw, which is simply screwed into the Padlock_Body.
Relative to the original design, Padlock_Body and Padlock_Shackle have changed, other parts are interchangeable.

Another minor modification: Padlock_Tumbler is split into two parts: External_Tumbler and Internal__Tumbler. Collecting them together you can change the lock code. Unfortunately, in order to print them with high quality, a well-tuned printer is required. If you can't, it's better to use the Padlock_Tumbler from the original design instead.

You can see the print settings and the lock pick in the original design.

I note that the nut should not be tightened too much - otherwise it will be difficult to unscrew it.