Commodore SX-64 full handle replacement

This is a full replacement for the Commodore SX-64 handle. This is not a 1:1 replacement, since you can't reproduce the original iron, step mechanism, with a 3D printer. But if your SX-64 lacks the handle, this is quite a good replacement. Even without a real "click" mechanism that keeps the bar in the position you choose, it can be used to keep the computer raised while you're working (see pictures).

Every file shows how many parts you need to print. You will need some screws: I used what I have at home, 3.5 x 35 mm screws (wood pitch) plus two 4 x 20 mm screws (normal pitch) to fix the two arms to the computer chassis, and 3 iron pins (about 30 mm) for to fix the bar segments. You can print these pins too, but I recommend to use metallic pins. I took some 3.5 x 35 mm screws and I cut away the head.

----------------------------------------------------

IMPORTANT NOTE: the parts are already placed in the right way, especially for the holder: it shouldn't be rotated. Print it wi