Compact Bubble Maker (BambuLab Kit)

I have a stationary bubble maker for you here. It is designed for the Electric Bubble Maker Kit from BambuLab. All necessary parts are listed in the BOM. Assembly instructions:Step 1:Insert the heating insert into the small hole at the back (M3 insert): Step 2:Insert the Bubble Maker into the large hole of the body. Make sure the part is positioned as shown in the picture: Step 3:Insert the switch into the holder provided: Step 4:Insert the silicone tube through the silicone plug provided. Then insert the hose into the hole in the tank. Make sure that it bends slightly around the corner and down into the tunnel. This should be possible with a little pressure and twisting. You may want to shorten the hose a little, but be careful not to cut it too short. Finally, insert the silicone plug into the hole in the tank. Then place the tank between the two edges of the body. Step 5:Attach the tw