Compact latching box for Sparrows Disc Pick

READ FIRST: You will need something to make the 2mm-thick pins for the hinges and latch out of. An old bicycle spoke is perfect. This is a compact box for the Sparrows Disc Pick that fits the disassembled tool, a couple of spare parts and my spacer. The spare grub screws thread right into the plastic so they can't be lost. Print settings I used: Material: PLA Layer height: 0.2mm Walls: 3 Infill: 15% The lid comes in two variants: with and without the Sparrows logo. To print the variant with the logo you must use a layer height of 0.2mm, as that's the precise depth of the logo inset. The instructions below are for Bambu Studio, but your slicer most likely has similar options: Import the Lid_with_Logo.3mf file. If prompted, select "Import geometry only". In the "Objects" tab, choose the filament color to use for each part. Optional: If you want to rearrange the objects without their relative position changing, select both of them, right click and select "Merge". Click the gear icon next