Thingiverse

Compact planetary gearbox

by Citrionyx

50 Downloads

58 Likes

0 Makes

This is compact planetary gerbox with ratio of 4:1 per stage

!!! I made tolerances a bit too tight, so horizontal size compensation of at least -0,04mm is higly recomended.

For a single stage gearbox you will need:
4 planets
1 body 6
1 body13
2 body 23 (for any amount of stages you will need only 2 of those)
1 Spur_Gear_30_teeth
1 motor gear
4 screws
4 nuts (not really needed)

Autodesk Fusion 360 compact customizable f3d fully 3d printed fully printable fusion360 fusion 360 Gear gearbox gears Gear Reduction mechanical mechanism Planetary Gear Planetary Gearbox planetary gears reduser Autodesk Fusion 360 compact customizable f3d fully 3d printed fully printable fusion360 fusion 360 Gear gearbox gears Gear Reduction mechanical mechanism Planetary Gear Planetary Gearbox planetary gears reduser

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format