Complicated track v1.4 final version

This is the final version of this particular track design, i added small slots for the iron wire to fold into when assembled, these iron wire stubs will also act as spikes for extra traction. Distance between pin holes is 17mm, drive wheel peg diameter is 5mm, width is 44mm, length is 17mm. I suggest you use roadwheels 24mm in width and with a minimum diameter of 30mm. As for drive gears, i suggest you design your own ones, modeling the gears should be easy enough when you know the distance between pin holes (17mm) and the peg diameter (5mm).