Thingiverse

Component drawer rack. (modules)

by RobbertDIYprojects

117 Downloads

80 Likes

1 Makes

Hi all
this is my first upload so bear with me

For my hobby i needed a lot of small drawers to sort and store my components.

found multiple designs, but most of them are pretty weak due to vase mode. or use an excessive amount of filament.

thats why i (re)designed this set.

The rack is a lot stronger then vase mode drawers. cut holes in the frame to reduce filament and printing time but keep it strong.
The rack has 15 drawers (width 3 height 5)
192 x 165mm
(multiple blocks can be glued together with superglue gel)

also redesigned the drawers, but with the idea of Jahislove in mind.
added a bezel to easily slide in.
The drawer can be printed with 6 pieces at a time.
(i can print 48 drawers on one kg and have some spare)
drawers dont have a lock so they can be pulled out easy.

drawer size:
60x85x30

i also uploaded a small single row rack to glue on top. (top side closed)

uploaded the 3 stl files (drawer, rack and top rack)
included my gcode with max p

arduino bracket Capacitor component diode diy drawer drawers electronics electronic components LED LEDs modular pcb quick print rack resistor resistor box solid tools arduino bracket Capacitor component diode diy drawer drawers electronics electronic components LED LEDs modular pcb quick print rack resistor resistor box solid tools

Source

Thingiverse

What you need to print this: Advanced Medium confidence

Why?

no supports · 6-part assembly · large print

Support-free 6 parts to assemble

Supports 0/3

Assembly 2/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

192 mm (Large)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Component drawer rack. (modules)?

Any FDM printer should handle Component drawer rack. (modules) just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 192 mm is recommended.

Does Component drawer rack. (modules) need supports when printing?

No supports needed for Component drawer rack. (modules) — it's designed to print clean off the bed.

What file format is Component drawer rack. (modules) available in?

Component drawer rack. (modules) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Component drawer rack. (modules) free to download?

Yes, Component drawer rack. (modules) is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Component drawer rack. (modules)

Similar Models

Add to Collection