Compressed Air Turbine

i made this Compressed Air turbine because there was nothing on thingiverse that looked like what i wanted.
so here is what your are gonna need to assembly it;
- 5 M3x30 bolts
- 1 3mm thick and 3cm long nail
- a few M3 washers
- strong glue

so here is how it should be assembled:
insert the nail through the hole on the bottom of the turbo housing and secure it in to place with glue. make sure it is alligned properly and it's pointing upwards.also put some M3 washers over the nail before you insert the impeller over the nail and secure the upperplate with the M3x30 bolts.

if you want to hook it up to a compressor you could tap a M8 fitting into the side hole of the turbine.

note: i'm not responsible for any ijuries caused by this thing. building this and experimenting with this thing is at your own risk.

have fun with it and don't let it blow up in your face!

Huib