Concorde Hueforge

i tried using other colours and settled with these for the best variation, i didnt try black white and grey but i think that would work well, i found black was too dark as i have lots of dark prints already but would love to see any printed versions. Print at 100% infill with a layer height of 0.09mm with a base layer of 0.16mmThe Model is was 180x135mm in size but scaled down to 165x123mYou may print at higher layer heights below the Base Thickness of 0.52mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.14mmFilaments Used: PLA Brown Transmission Distance: 3.5 PLA Orange Transmission Distance: 5.5 PLA Yellow Transmission Distance: 6 PLA White Transmission Distance: 2.5This print uses 4 unique filamentsSwap Instructions: Start with Brown At layer #9 (0.88mm) swap to Orange At layer #13 (1.24mm) swap to Yellow At layer #21 (1.96mm) swap to White for the rest.