Conduit Pipe Camera Tripod (Extendable)

The Tripod is built using only PVC conduit piping and some 5mm bolts and nuts.

Print the following parts as indicated:
- 1 x Camera Mount Hex
- 3 x Foot V3
- 3 x 25mm End Cap V3
- 3 x 20mm Stopper Cap V3
- 3 x Leg Extension Hex V3
- 4 x Tightner V3
- 1 x Tripod Head V2


Parts to purchase:
- 3 x 25 mm conduit piping (Length should be between 600 - 1200mm) estimated $1 - $3
- 3 x 20 mm conduit piping (Length should be 10mm longer then your 25mm pipes) estimated $1 - $3
- 3 x 20mm round rubber feet covers estimated $1 - 3

Bolts and Nuts:
- 4 x 5mm hex nuts estimated $0.2
- 3 x 5mm hex bolts (length 20mm) estimated $0.3
- 3 x 5mm hex bolts (length 40mm) estimated $0.3
- 1 x 5mm hex bolt (length 60mm) estimated $0.2

Step 1:
- Drill one 5mm hole center straight through,10mm from the top side of each 25mm conduit pipes.

Step 2:
- Insert all 3 25mm pipes through the Tripod Head V3 and attach them using the 40mm bolts.

Step 3 :
- Glue in place on the top of e