Thingiverse
Connector Screw
par alejndro-javier
5
Téléchargements
3
Likes
0
Makes
Screws/bolts/connectors to attach objects seamlessly without nuts
---
I have successfully printed these connector screws with PLA. I do recommend printing with the finest layer high as your 3D printer can print. The screws can print successfully vertically but you'll need supports. However, if your project has to be heavy-duty or is going to be under compression or tension forces, I heavily recommend printing at a 45° angle. I've included a support model to ease the printing at an angle. If printing at an angle you should orient the gap on the female screw to be upwards.
I’ll kindly receive any feedback, enjoy your screws.
---
I have successfully printed these connector screws with PLA. I do recommend printing with the finest layer high as your 3D printer can print. The screws can print successfully vertically but you'll need supports. However, if your project has to be heavy-duty or is going to be under compression or tension forces, I heavily recommend printing at a 45° angle. I've included a support model to ease the printing at an angle. If printing at an angle you should orient the gap on the female screw to be upwards.
I’ll kindly receive any feedback, enjoy your screws.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
