Conscendo Wheel

Landing wheel for Conscendo Evolution. Plane has a plastic skid, landing on a hard surface wears it out pretty fast, so I designed this replacement. It takes the place of the stock skid.I am pretty sure that the same skid is used on the Conscendo Advanced also. I intend to print one and try it on the Advanced.Print SettingsPrinter Brand:CrealityPrinter: Ender 3 ProRafts:NoSupports: YesResolution:.16 or .2Infill: 20Filament:Overture PLA and TPU White Notes: I included a screen grab of my support setting for the skid. It is printed at .16 layer height. The settings listed work pretty well on my Ender 3 pro, print the skid oriented so that the 4 pegs are on the build plate. Print with a Brim.The two wheel pieces are joined with a 3mm x 6 screw. It should self tap into the other half of the wheel. The wheel can be printed at .2 mm layer height.A 3mm x 30mm bolt is used for the axle, using a jam nut.The TPU wheel was printed on my Creality CR-6 w/Direct Drive.Category: R/C Vehicles