Contra NES Title Screen

HueForge image of the Contra title screen for the Nintendo Entertainment System (NES). HueForge NotesSingle AMS Instructions: Load Black, Magenta, Red, YellowSet White to print in the Magenta slot and Grass Green to print in the Yellow slotI have added a pause at layer 11 during which you should unload the Magenta spool and resume printing. When the printer gets to the first White layer, it will pause because it is out of filament. Load White into the Magenta slot and Grass Green in the Yellow slot and resume printing for the rest of the image.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.64mm Filaments Used:#000000 PLA Sunlu Black Transmission Distance: 0.3#d83491 PLA+ Sunlu Magenta Transmission Distance: 3.3#f7423a PLA+ Sunlu Cherry Red Transmission Distance: 5.8#fdcc1a PLA+ Sunlu Vivid