Cool Cat Hueforge

This is my very first Hueforge I've created. Image is AI generated by my requirements then converted via purchased HF professional software Cool Cat Blue: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Sky Blue Transmission Distance: 4 PLA White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Sky BlueBorder Only Colours from here until the end. At layer #12 (1.04mm) swap to White for the rest. Cool Cat B/W: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mmFilaments Used: PLA Black Transmission Distance