coolant mod for 3018 cnc

Add on coolant for 3018 cnc machines or similar and enclosure for grbl controller.
I cut mostly carbon fiber with mine, didn't want carbon dust


Way covers can be made out of some plastic sheet, accordion fold every 1/2in

"sucky wucky.stl" can be paused mid print to insert magnets if using a metal drain pan, you will need to use a torch to heat up the barbed fitting before inserting it.

You will need some type of mostly airtight container for the reservoir. I found a decent one at goodwill. Cut/drill a hole in the top, clamp together using the seal plates(print with 100% infill) and seal with some sort of silicon and cram the line through. its a tight fit, you want a tight fit. lil bit of dish soap will help.

Tall container is recommended, bigger the better. You want the return line to touch the bottom, and the feed to be 2/3ds the way up (to keep it from sucking up too much crap and clogging your filter)
be sure to leave enough line to be able to place the container on