Core A8 slim 20mm compact

This is a work in progress, DON'T PRINT IT! I'll test it as soon as I receive the new board.

I don't plan to use a 310x310mm bed in the future so I created this mod to make the printer smaller without losing print area.

This mod works with Core A8 slim 20mm (https://www.thingiverse.com/thing:3588785) and Core A8 E3D-V6 carriage (https://www.thingiverse.com/thing:3653778).

You need to cut the frame pieces to these sizes:
Vertical Z Tube 400mm x 4
Horizontal Y Tube 306mm x 2
Horizontal X Tube Top 251mm x 2
Horizontal X Tube Bottom 346mm x 2
Z rod 400mm x 2
X rod 286mm x 2
Y rod 286mm x 2

Overall size when built is about 42 x 40 x 48 cm (reduced about 10 cm on x and y axis and 2 cm on z axis).

Printed parts you need:
Top rod mount support x 2
Top rod mount x 2
Bed support x 2
Clamp compact x 2
z support x 2
z support lock x 4

I also replaced original steel rods with aluminium ones to reduce drag, this is optional!

Additional parts you need:
LM8UU x2 (to