Core V1 Front USB Mount

I have a couple USB2 devices that get in the way when plugged into my Thermaltake Cover V1.
This is a mount to an a pair of USB 2.0 Ports under the front cover of the case. To install it, you'll need:

- 1x of each print
- 1x USB2.0 9pin to 2x type A cable (includes 2x M3*12mm (?) screws)
- 2x M3*16mm screw
- 2x M3 nuts
- 2x M3 washers

I built this in TinkerCAD, it's in a public entry under: https://www.tinkercad.com/things/brKE1JjQ7lc

I think the USB cable's dimensions are a standard-ish size so there are probably other USB 2/3 cables that would work for this. I used this one from Aliexpress: https://www.aliexpress.us/item/2251832810412633.html?spm=a2g0o.productlist.main.79.70c716bcBbFHFT&algo_pvid=d181a487-c37e-4844-abb7-9e075285c442&algo_exp_id=d181a487-c37e-4844-abb7-9e075285c442-39&pdp_ext_f=%7B%22sku_id%22%3A%2266902350271%22%7D&pdp_npi=3%40dis%21USD%213.54%213.54%21%21%21%21%21%4021021b4716784222951165244d0701%2166902350271%21sea%21US%213470995396&curP